Atomic Absorption Spectrophotometers

Infra-Red Spectrophotometers

UV/Visible Spectrophotometers

Gas Chromatographs

Dedicated Analyzers

High Performance Liquid Chromatographs

Accessories & Supplies

Basic Model Overviews
     
  Arsenic Hydride Analyzer 411
Provides detection limits of 500 parts per trillion (0.5 parts per billion.)
Enclosed, electrically heated quartz tee tube provides safe reaction of hydride generation products to give stable, hi energy arsenic signals.
Fully integrated continuous flow hydride system provides simple operation with real-time sample data.
Can be used with low cost technical grade argon or nitrogen purge gas with complete flow meter controls on instrument for optimizing the data.
Internal software capable of multi-port linear and quadratic calibration curves with statistical analysis of sample data.
Direct printout for 21-CFR part 11 compliance and optional data transfer software for PC data storage.
Easy to operate with virtually nothing to adjust
Unique in-line Deuterium corrector provides superior energy compared to any other arsenic method for the best accuracy and freedom from interferences
Toll-free technical assistance and on-line application support.
  Total Hydrocarbon Analyzer Model HC-404
Fixed wavelength 2924cm-1 (3.42µL) allows for quick analysis without unnecessary scanning.
Digital readout in %T and absorbance, or in concentration mode for direct ppm readings.
Accommodates 10, 50, or 100mm quartz cells for analysis to 1ppm or lower detection levels.
Built-in scale expansion and extended linear range for high concentration, using a simple 3-step calibration.
Peltier cooled PbSe detector provides greater than 2500 to 1 signal to noise ratio, resulting in the very best detection levels and excellent instrument stability.

  Cold Vapor Mercury Analyzer-410
Detection limit 10 PPT
400mm Flowcell for lower detection levels
Complete analytical system includes Hg Cold Vapor Kit
Affordable price perfect for labs with limited budget
Quick analysis and recovery time
Up to eight point calibration curve
Push button Quick-Purge for flow cell flushing
RS 232, Printer and analog recorder output
Simple to use-minimal operator training
D2 Background correction
Toll-free technical assistance
  Flame Photometer Model PFP-7
Large clear digital readout for readings to 0.1 ppm.
Push button ignition
Switchable decimal point
Electronic flame failure detection
Filter wheel for fast changing of analytical parameters
Fine and coarse sensitivity controls
Operates on propane, butane, natural gas or L.P.G. supplies
Recorder output
Economically priced
 

Home & Site Map | Contacts & Locations | About Buck
Application Notes | Markets Served

Buck Scientific
1-800-562-5566
sales@bucksci.com
58 Fort Point Street • East Norwalk, CT 06855
P: 203-853-9444 • F: 203-853-0569