| Infrared
Crystals
Discs
| - |
13
x 2mm |
25
x 4mm |
32
x 3mm |
38
x 6mm |
49
x 6mm |
| NaCl |
|
|
|
|
|
|
| KCl |
|
|
|
|
|
|
| KBr |
|
|
|
|
|
|
| CaF2 |
|
|
|
|
|
|
| BaF2 |
|
|
|
|
|
|
| CsI |
|
|
|
|
|
|
| KRS-5 |
|
|
|
|
|
|
| AgBr |
|
|
|
|
|
|
| ZnS |
|
|
|
|
|
|
| ZnSe |
|
|
|
|
|
|
| SiO2 |
|
|
|
|
|
|
| AgCl |
|
|
|
|
|
|
Rectangles
| - |
30
x 15 x 4mm |
38
x 19 x 4mm |
41
x 23 x 6mm |
50
x 25 x 6mm |
| NaCl |
|
|
|
|
|
|
|
|
| KCl |
|
|
|
|
|
|
|
|
| KBr |
|
|
|
|
|
|
|
|
| CaF2 |
|
|
|
|
|
|
|
|
| BaF2 |
|
|
|
|
|
|
|
|
| CsI |
|
|
|
|
|
|
|
|
| KRS-5 |
|
|
|
|
|
|
|
|
| AgBr |
|
|
|
|
|
|
|
|
| ZnS |
|
|
|
|
|
|
|
|
| ZnSe |
|
|
|
|
|
|
|
|
| SiO2 |
|
|
|
|
|
|
|
|
| AgCl |
|
|
|
|
|
|
|
|
*Note:
Zinc Selenide (ZnSe) and Zinc Sulfide (ZnS)
are supplied in half thicknesses,
except for 2mm and 3mm thick discs.
ATR
Trapezoid Reflection Plates
| - |
KRS-5 |
ZnSe |
Ge |
| 45° |
60° |
45° |
60° |
30° |
45° |
| 50
x 20 x 2mm |
|
|
|
|
|
|
| 50
x 20 x 1mm |
|
|
|
|
|
|
| 50
x 10 x 2mm |
|
|
|
|
|
|
| 50
x 10 x 3mm |
|
|
|
|
|
|
| 50
x 20 x 3mm |
|
|
|
|
|
|
ATR Parallelogram Reflection Plates
| - |
KRS-5 |
ZnSe |
Ge |
| 45° |
60° |
45° |
60° |
30° |
45° |
| 25
x 10 x 3mm |
|
|
|
|
|
|
| 25
x 20 x 3mm |
|
|
|
|
|
|
| 50
x 10 x 3mm |
|
|
|
|
|
|
| 50
x 10 x 2mm |
|
|
|
|
|
|
| 50
x 20 x 3mm |
|
|
|
|
|
|
| 50
x 20 x 2mm |
|
|
|
|
|
|
| 60
x 6 x 6mm |
|
N/A |
|
N/A |
|
N/A |
Calibration
and Accuracy Test Pieces
| BS186-0449
Polystyrene Test Film (0.05mm Thick) |
| Polystyrene
is a generally accepted test film for performing
the following tests on infrared spectrophotometers:
Performance, resolution, frequency, accuracy
and stray lights tests. The test film is 0.05mm
thick and is pre-performance for easy insertion
into the sample slide of the instrument. |
| BS186-0450
Neutral Density Filter (0.50 Abs.) |
| The
Neutral Density Filter is used for performing
absorbance accuracy tests of the spectrophotometer.
The Neutral Density Filter is set to measure
0.50Abs. and comes pre-mounted for easy insertion
into the sample slide of the instrument. |
Crystal
Polishing Kit
The
Crystal Polishing Kit contains everything needed
for polishing and buffing most infrared transmitting
crystals, such KBr, NaCl and KCl.
Warning:
Due to the toxicity of KRS-5 dust, we recommend
that KRS-5 crystals be re-polished professionally.
004-5906
Infrared Polishing Kit
Contains
the following items:
| • |
Mahogany
Base |
• |
#400
grit Coarse Abrasive |
| • |
Two
Ground Glass Disks |
• |
#600
grit Fine Abrasive |
| • |
Two
Self Adhering Pads |
• |
Three
Camel Hair Brushes |
| • |
Cerium
Oxide Polishing Compound |
• |
Polyethylene
Bottles |
| • |
Instructions |
• |
• |
Replacement
Parts
CR001LT
Polishing Pads (package of 6)
004-0001
Bottle of #400 grit Coarse Abrasive
004-0002
Bottle of #600 grit Fine Abrasive
004-0003
Bottle of Cerium Oxide Polishing Compound
<<Back
to Infrared Accessories Index |
