|
Liquid
Permanent
Sealed Liquid Cells
The
Permanent Sealed Liquid Cell consists of stainless
steel body, which is corrosion resistant. Each
cell is permanently mounted and sealed in the
stainless steel body and each has a precise
path length. Permanent Sealed Liquid Cells
are calibrated with the interference fringe
calculation before leaving the factory. Since
the cell thickness is permanently fixed it
provides the user a means for accurate, reproducible
results, making it ideal for performing quantitative
measurements. The cell is filled through the
Luer-Lok filling ports. Permanent Sealed Cells
cannot be disassembled without destroying the
cell. Should the cell become damaged it can
be sent back to Buck Scientific to be repaired.
Important:
When ordering Permanent Sealed Cells with the FTIR design, add the letter "C" to
part number. For example, the part number for 0.015mm NaC1 Permanent
Sealed Cell for the dispersive holder is 5153 while the part number for
the 0.015mm NaC1 Permanent Sealed Cell for the FTIR holder is 5153C.
|
|
Pathlength
|
|
Window
Material
|
0.015mm
|
0.025mm
|
0.050mm
|
0.10mm
|
0.20mm
|
0.50mm
|
1.0mm
|
|
NaC1
|
|
|
|
|
|
|
|
|
KBr
|
|
|
|
|
|
|
|
|
CaF2
|
|
|
|
|
|
|
|
|
BaF2
|
|
|
|
|
|
|
|
|
KRS-5
|
|
|
|
|
|
|
|
|
ZnSe
|
|
|
|
|
|
|
|
Circular
Demountable Cell Holders
The
Circular Demountable Cell Holder is ideal for
use when analyzing liquids because theses cells
are leak-proof and provide an even pressure.
Since the windows that are used in this holder
are not amalgamated together (as in permanently
sealed cells), the cell is easily convertible
to accommodate many sampling types, including
mulls and capillary films. Luer-Lok fillings
ports make filling and clean up easy.
Cell
Assembly
When
analyzing mulls or capillary films, the cell
is assembled with one or two undrilled windows
and when analyzing liquids, the cell can be
assembled with one undrilled window, a Teflon® spacer,
and a drilled window to create a cell with
a specific path length. A Teflon gasket is
used to help prevent leakage.
| 6500SD |
Demountable
Cell Holder (Dispersive)
| • |
10
x 22mm aperture |
| • |
Window
size: 32 x 3mm* |
| • |
Consists
of Stainless Steel Holder,
two sealing gaskets, Teflon "O"-Rings,
a needle plate, and a package
of assorted spacers. |
|
|
| 6500S |
Demountable
Cell Holder Kit (FTIR)
| • |
14mm
aperture |
| • |
Window
size: 32 x 3mm |
| • |
Consists
of Stainless Steel Holder,
two sealing gaskets, Teflon "O"-Rings,
two Teflon plugs, a compensating
ring, Teflon spacers, a needle
plate, and a package of assorted
spacers. |
*Windows are not included
|
|
Size
(mm)
|
Teflon
|
Lead
|
Copper
|
|
0.015
|
|
-
|
|
|
0.025
|
|
-
|
|
|
0.050
|
|
|
-
|
|
0.10
|
|
|
-
|
|
0.20
|
|
|
-
|
|
0.50
|
|
|
-
|
|
1.00
|
|
|
-
|
|
Assorted
|
|
|
-
|
Note: The
spacers listed above are used with both
styles of the Circular Demountable Cell.
|
|
|
Teflon
Plugs (12pcs) |
|
|
Needle
Plate (use with 6500SD) |
|
|
Needle
Plate (use with 6500S) |
|
|
"O"-Ring
(6 pcs) |
|
|
Gasket,
Teflon (6 pcs); use with 6500SD |
|
|
Gasket,
Teflon (6 pcs); use with 6500S |
|
<<Back
to Infrared Accessories Index
|
