Liquid

Circular Amalgram Cells

The Circular Amalgam Cell comes pre-assembled and ready to use with the Circular Demountable Cell holder (P/N65005). They provide an inexpensive alternative to the permanent sealed cell. This cell consists of one drilled window and one undrilled window amalgamated together with a metal spacer of specific path length and then the assembly is amalgamated to the Needle Plate (the plate containing the Luer-Lok filling ports).

Important:
When ordering Circular Amalgam Cells for FTIR cell holders remove the letter "D" from the part number. For example, the part number for 0.015mm NaC1 Circular Amalgam Cell for the dispersive holders is 5097SD while the part number for the 0.015mm NaC1 Circular Amalgam Cell for the FTIR holder is 5097S.

High Purity Quartz Cells

Ideal for transmission studies in the Near Infrared (i.e., ranges of 5,000 to 4,000-1 and 3,500 - 2,500cm-1). These cells are ideal for measuring oils and hydrocarbons in water and are especially useful for performing EPA Methods of Analysis for water pollution investigations. Fused quartz is not soluble in water and transmits light from 0.17 to 4 micrometers.

Beta Cell

The Beta Cell is the most convenient, low-cost, easiest to use Demountable Cell available. Assembly is accomplished by placing the sample between two undrilled windows that are separated by a spacer. The windows are then placed into the holder and held secure with the threaded retaining ring. This type of cell is ideal for student use and is durable enough for continuous use. Recommended when analyzing unknown samples so as not to risk ruining more expensive cells. Uses standard 25 x 4mm discs.

Micro Flow Through Cells

These cells are designed for use with both Dispersive and FTIR Spectrophotometers. Used for analyzing very small volumes or analyzing HPLC/LC liquid fractions. Two 13 x 2mm windows are permanently amalgamated to the cell body forming a leak-proof seal. This cell is not designed to be taken apart and will be destroyed if it is disassembled. The complete assembly includes the cell body, leads, windows and mounting plate.

Mini Cell^®

The Mini Cell is the most economical approach for obtaining qualitative spectra of liquids. The window fits into one portion of the cell. The second portion is then screwed in to form the seal. The AgC1 cell windows each contain a 0.025mm circular depression. The rim of the window is flat to insure proper sealing. Because AgC1 cold flows slightly under pressure, a tight seal is formed. The 0.025mm circular depression in each window enables the cell path length to be varied.

018-4041	Mini Cell Kit • Complete with a Delrin cell holder, slide plate holder, and 6 AgCl windows with 0.025mm depression.
018-4045	Mini Cell AgCl Windows • Package of 6 with 0.025mm depression.
018-4044	Mini Cell Sample Holder • Without windows
018-4044	Mini Cell Sample Holder

<<Back to Infrared Accessories Index