210VGP Atomic Absorption Spectrophotometer

Standard Features The 210/211 is shipped ready for use.  All operating conditions are pre-loaded in the internal computer, including lamp settings, secondary wavelengths, and alternate methods of analysis for over 60 elements by flame, furnace, or hydride techniques.  The three lamp turret has individual controls for alignment and standby mode to keep lamps warm.  Direct report generation to a printer or data linking to the optional Buck Analyst software package is easily done using the parallel and RS232C ports. Analytical Performance The Buck 210/211 is a high energy, microprocessor controlled single beam atomic absorption spectrophotometer.  Solid state electronics and simple optics provide the basis for our superior stability and sensitivity. The Ebert mount monochromator and user-selectable bandwidth give the system maximum flexibility. Our short-path dynamic nebulizer/burner configuration is highly efficient. An inert needle, precisely positioned in a high flow venturi, delivers sample to the corrosion proof impact bead. This results in a tremendously high nebulization effect for all types of sample matrices Deuterium Background Correction This is the oldest and still most commonly used technique, particularly for flame AAS.  In this case, a separate source (a deuterium lamp) with broad emission is used to measure the background absorption over the entire width of the exit slit of the spectrometer. In the 210VGP & Accusys 211 the deuterium lamp is in-line with the hollow cathode lamp, thus eliminating the need for a double beam system. The benefits of a single beam system are more energy, smaller size, lower cost, and a more sensitivity. Optical Layout The Buck 210VGP is a single beam AA which has proven itself worldwide as a workhorse.  Our simple, single beam optical layout may buck convention, (no pun intended) but we know it works better.  Let us explain. Double beam instruments were originally designed to overcome poor hollow cathode lamp characteristics, noisy Power Supplies, drifting detectors & amplifiers, thermal expansion variations in optical components (mirrors, beamsplitters, mounts, etc.) By using a high light-loss optical component, the beam splitter, to divide the signal beam from the hollow cathode lamp, served to correct for these low performance components; thus halving the available energy to make a sample measurement, compensation between the reference and sample beams was maintained. In later years, the addition of a deuterium continuum lamp for background correction introduced a second beam splitter; thus cutting the hollow cathode lamp energy in half again. This does not even take in to account the 6-10 additional Mirrors used to define the optical path for these large, heavy and expensive (albeit very stable) double beam AAS instruments. So, after fixing AA instruments for 20 years Buck set out to design a single beam AA just to see if it could be done.  Well it worked, and since 1992 the 210VGP has been delivering superior results due to it's simple optical layout providing a high energy throughput.

DOWNLOAD AA Catalog (PDF)

Download 210-211 AA User manual

Click here for the 210VGP Package Deal!

Atomic Absorption Application Notes

Customer Reviews:

We bought our first 210 instrument in the late 90's and added a second instrument soon after which was set up as a graphite furnace AA. The AA has
analyzed over 175,500 samples and is still going strong. The GF instrument has analyzed more than 10,100 samples and is still going strong. These
instruments are used in the environmental industry in an accredited laboratory. As the company owner I can't think of a more reliable, precise and
accurate instrument. Through the years Buck has supported us with friendly and quality telephone support. The service parts are always in stock.
The best part is that when you do need to speak with someone at Buck, there is no phone hassle. You actually speak to real people every time.
rnrnJim Richards, MACS Lab, Inc. 530-274-1470

Thanks to Buck scientific for the 12 years of great service. I bought my first 210 aa in 2000 and lots of accessories over the years and
never had any problems. I just bought a new 210 to update with the times. rnrn-Steve Scott PS thanks Dan Sobin For All the help
rn(928)279-2590

Write a review for this product!

Now please write a (short) review....(min. 1, max. 2000 characters)


Enter the code below:

Characters written:

You may also be interested in this/these product(s)

211 Acusys Atomic Absorption Spectrophotometer $14,995.00

210VGP Atomic Absorption starter package $12,250.00

205 Atomic Absorption Spectrophotometer $9,495.00

The Buck Educational Package $24,500.00